HUBER Grit Washer RoSF G4E

Grit separation, washing, dewatering in one system

  • Reduced disposal costs
  • Low investment costs
  • Over 90% separation efficiency of grain size > 0.2 mm
  • Reduction of organic content to < 5%
  • Also suitable for classified grit trap material from biogas plants

The Grit Washer RoSF G4E combines continuous separation and washout of contaminated grit trap material in one plant.

Read more...close

Grit classifying:

Sediments from the grit trap are introduced in the upper part of the plant as a mixture of grit, organics and water. Due to the low surface overflow rate virtually all particles are separated and accumulate in the bottom part of the tank.

Grit Washing:

Due to the introduction of service water in combination with a slowly rotating circulation system the lighter organic particles can easily be separated from the dense mineral particles in the bottom part of the tank. After removal of the organic material the clean grit is automatically removed by a screw conveyor, at the same time statically dewatered, and discharged into a container.

The removed organics are continuously discharged with the introduced wash water.

Benefits

Benefits

  • Reduced disposal costs
  • Reduced water consumption below 2 m³/h
  • Surface overflow rate < 25 m/h
  • 90% separation efficiency of grain size > 0.2 mm
  • Reduction of organic content to ≤ 5 %
  • Dry residue in washed grit > 90%
  • Screened wastewater can be used as wash water
  • Two plant sizes available (8 l/s and 16 l/s throughput)
  • Optionally available as a classifier with wash function
  • Also suitable for classified grit trap material from biogas plants

Downloads

Case Studies

Design Sketch

Design Sketch

Process diagram
Process diagram

Media

Media

Special design for the treatment of sediments from biogas plants
Separated, washed and dewatered grit
Grit washer installation on a municipal sewage treatment plant

Products

request further product information