HUBER Clapet de rinçage SK
Economic and efficient flushing system for any stormwater tank
- For optimal cleaning results
- Low-noise tipping
- Easy tipping
- For flushing lane lengths up to 100 m
Systems which generate a flush are especially suitable to clean stormwater tanks. An especially cost-effective and reliable solution to remove the settled material are HUBER tipping buckets as they neither have moveable parts submerged in wastewater nor do they require any special flushing medium. Depending on discharge height, tank length and base slope, HUBER Tipping Buckets with specific flush water amounts from 200 to 2,000 l/m are installed.
HUBER Tipping Buckets are used for efficient and cost-effective cleaning of the following storage facilities:
- Stormwater overflow tanks
- Stormwater retention tanks
- Sewers with storage capacity and overflow
- Other storage facilities
Poursuivre...Fermer
The bucket including all attaching parts is manufactured from stainless steel and acid-treated in a pickling bath. The bucket bearings are optimized bearings designed especially for the static and dynamic loads for a superior product life. The special bucket design effects a low-noise tipping operation so that additional sound insulation is unnecessary, and ensures that the flush water is optimally poured out so that the full kinetic energy of the flushing medium can be used for the cleaning process. The special design of the buffers ensures gentle introduction of the forces into the structure during tipping of the buckets. Permanent monitoring of the tipping buckets is possible by means of a motion detector. To meet any project-specific installation requirements, three different support constructions are available for installation of the tipping buckets in the structure.
